As an Amazon Associate we earn from qualifying purchases. Product links on this page may be affiliate links.
Last reviewed: November 2026. Sources last checked November 2026.
If your drain is 10 inches from the finished wall, look for a sheet that says "10" rough-in" in the maker's own words. TOTO and Kohler each publish sheets for several two-piece models that do. Most are elongated at 1.28 gallons per flush (gpf), the water volume of one flush; the Kohler Cimarron K-3851 is round-front. The table below gives each sheet's figures and the MaP score where the list has one. Do not buy a 12-inch model and hope: TOTO's manual says models with a 10-inch rough-in have model numbers ending in ".10".
We have not tested any of these toilets. Everything below comes from the makers' spec sheets and product pages, and from the MaP list, and each source is linked.
Models whose own sheet says 10 inches
Sources: each maker's spec sheet (linked in the model column), plus the MaP list of September 24, 2026 for the last column. Checked November 17, 2026. "Rough-in" is copied from the sheet; we did not take it from MaP's list, which has its own rough-in column that we did not use (see below).
| Model | Rough-in on the sheet | gpf on the sheet | Bowl | What the maker calls the height, and any figure | WaterSense on the sheet | MaP score (grams) |
|---|---|---|---|---|---|---|
| TOTO Drake CST776CEFG.10 (seat sold separately) | 10" | 1.28 | Elongated | Universal Height; no seat-height figure | Listed | 1,000 |
| TOTO Drake MS776124CEFG.10 (with SoftClose seat) | 10" | 1.28 | Elongated | Universal Height; drawing labels "Seat Height" 17-5/8" | Listed | 1,000 |
| TOTO Eco Drake CST744EF.10 (seat sold separately) | 10" | 1.28 | Elongated | Universal Height; no figure | Listed | 1,000 |
| TOTO Aquia CST412MF.10 (seat sold separately) | 10" | Dual flush: 1.6 and 0.9 | Elongated | Universal Height; no figure | Listed | No MaP score in the list |
| Kohler Highline K-6393 (seat not included) | 10" (254 mm) | Dual flush: 1.1 or 1.6, your choice | Elongated | Comfort Height; no figure in the text | Listed | 1,000 |
| Kohler Highline Arc K-78206 (seat included) | 10" (254 mm) | 1.28 | Elongated | Comfort Height; no figure in the text | Listed | 1,000 |
| Kohler Cimarron K-3851 (seat and supply line sold separately) | 10" (254 mm) | 1.28 | Round-front | Comfort Height; no figure in the text | Listed | No MaP score in the list |
| American Standard Cadet 3 270AB.101: its page says "Discontinued" | 10-inch | 1.28 | Elongated | Right Height; "Measures 17" tall, including seat" | Listed | No MaP score in the list |
Sources for the MaP column: MaP Testing, list of tank-type and electro-hydraulic toilets dated September 24, 2026, consulted November 17, 2026. We looked each model up by its number. The MaP row for the Drake CST776CEF(G).10 says that toilet is also sold as MS776124CEF(G).10, so the two Drake rows share one score. For the Kohler K-3851 the list has the plain number and a "-U" version, and neither carries a score. MaP's own note on the list: "Toilet models without a MaP Flush Performance Score have not been MaP tested." So a blank is not a low score.
"Listed" in the WaterSense column means the sheet names EPA WaterSense among its certifications or codes. WaterSense is the EPA label for toilets at 1.28 gpf or less; the EPA says Version 1.2 of its toilet specification is the one in effect (EPA WaterSense, residential toilets). For dual-flush models the spec counts the average of two reduced flushes and one full flush (WaterSense Tank-Type Toilet Specification 1.2), which is how a toilet with a 1.6 gallon full flush can carry the label. The federal ceiling for a toilet made since 1994 is 1.6 gpf (42 U.S.C. 6295(k)).
What the MaP column can and cannot tell you
MaP defines its score as "the weight in grams of the maximum amount of waste that can be fully evacuated from the toilet in a single flush (including toilet paper)" (MaP Testing). In the September 24, 2026 list, 2,795 models carry a number, the highest number is 1,000, and 2,105 of them sit at exactly 1,000 (our count of the list). Five of the eight rows above show that top value. That tells you they reached the top of MaP's scale, not that one beats another; it cannot separate them. For what the number means and how it relates to WaterSense, see best flushing toilets by the numbers.
One more caution about the K-6393: it flushes at 1.1 or 1.6 gpf depending on the lever, and the list gives a single score without saying which setting it was measured at.
What to look for on a 10-inch sheet
The ".10" at the end of the number. TOTO's installation manual for the Drake says: "Models with 10" rough-in have model numbers ending with ".10", for example C776CEFG.10" (TOTO installation manual). The same manual says the rough-in "must be at least 12 inches for most models". The sheets above bear this out: TOTO's CST744EF.10 and Aquia CST412MF.10 each end in ".10". Kohler and American Standard do not always use a suffix. A Kohler Cimarron with a 12-inch rough-in is the K-3589, whose sheet says "Standard 12" (305 mm) rough-in", while the K-3851 above is the 10-inch one (Kohler K-3589 sheet). American Standard's installation guide for the Cadet 3 series lists the 270AA at 12" and the 270AB at 10" in the same table (American Standard guide). The same bowl family comes in both rough-ins, so read the number on the sheet, not the name.
How the maker measures it. TOTO defines the rough-in as "the distance between the finished wall to the center of the closet flange" (TOTO installation manual, above). American Standard's 10-inch page says "Measurement from the finished wall to the center of mounting holes on the floor flange". Both measure from the finished wall, not from the baseboard or the stud. How to take that measurement in your own bathroom is in our rough-in guide.
TOTO's note on the flange. The Drake CST776CEFG.10 sheet says: "To maintain adequate wall gap between the back of the tank and wall, mount the floor flange at a nominal 10" rough-in distance." The CST744EF.10 and CST412MF.10 sheets carry the same note. The sheet ties the flange position to the gap behind the tank, so check your measurement against the sheet before you buy.
The height name, and whether there is a number. The makers use their own names for a taller bowl: Kohler's Comfort Height, American Standard's Right Height and TOTO's Universal Height. Kohler's sheets say the feature "offers chair-height seating that makes sitting down and standing up easier for most adults", with no number in the text. TOTO's page for the 10-inch Drake gives "Universal Height" and no figure (TOTO Drake page); only the sheet for the model with a seat, the MS776124CEFG.10, labels a seat height in its drawing. American Standard says "Measures 17" tall, including seat". Those are not the same measurement, so do not compare them as if they were. The difference between the brand names and the ADA's 17 to 19 inches is in comfort height vs standard toilets.
What is in the box. Of the eight sheets, the Kohler K-78206 is the one that includes the seat ("The Complete Solution toilets provide everything you need, including bowl, tank, seat, wax ring, and hardware"). The TOTO CST models and the K-6393 and K-3851 say the seat is sold separately or not included. The TOTO MS776124CEFG.10 is the Drake with a SoftClose seat.
Discontinued models
American Standard's page for the Cadet 3 270AB.101 says "Discontinued", and so does its page for the round-front 1.6 gpf version. That 1.6 gpf sheet says "1,000g MaP Score** at 1.6 gpf" (American Standard 270D sheet). We include the 270AB in the table because it is the maker's own sheet for a 10-inch model; it is a reference, not a pick.
Why MaP's rough-in column is not used here
The MaP list has a rough-in column too, but it does not always agree with the maker. It shows 10 inches for the Kohler Cimarron K-3589, and Kohler's own sheet for that model says 12. For that reason the rough-in in this article is the maker's, and MaP supplies only the grams.
Where to look next
The 10-inch size is the less common one. TOTO's guide calls 12 inches "the standard (or at least most common)" distance and says a 10-inch rough-in "is more common for smaller apartment bathrooms or powder rooms" (TOTO). If your measurement came out at 14 inches instead, see 14-inch rough-in toilets. To see what is on sale online on the day you look, here is a search for 10-inch rough-in toilets on Amazon; check the rough-in on the maker's sheet before you order.
Sources
TOTO: SS-02051 (CST776CEFG.10), SS-02021 (MS776124CEFG.10), SS-00448 (CST744EF.10), SS-00454 (CST412MF.10), installation manual, rough-in guide. Kohler: K-6393, K-78206, K-3851, K-3589. American Standard: Cadet 3 270AB page, installation guide, 270D sheet. MaP: list of September 24, 2026 and score definition. EPA: WaterSense toilets and specification 1.2. Federal: 42 U.S.C. 6295(k). All pages checked November 17, 2026. Comfort Height is a registered mark of Kohler, Right Height of American Standard.
If you'd like to read other articles similar to 10-Inch Rough-In Toilets Compared: What the Makers' Spec Sheets Say You can visit the category Rough-In Sizes.
You may also enjoy reading