Skip to main content
A white two-piece toilet against the wall of an older bathroom with vintage tile

14-Inch Rough-In Toilets Compared: What the Makers' Spec Sheets Say

As an Amazon Associate we earn from qualifying purchases. Product links on this page may be affiliate links.

Last reviewed: November 2026. Sources last checked November 2026.

If your toilet's rough-in is 14 inches, you need a toilet whose own spec sheet says 14". Few do. This page lists the ones we found: Kohler's Wellworth and Highline, Sterling's Windham and Mansfield's Alto, plus American Standard's Cadet PRO. Most of them are 1.28 gallons per flush (gpf); the Mansfield elongated one is 1.6. Measure first, because a 14" drain does not accept a 12" toilet without a gap behind the tank.

The table below comes from each maker's spec sheet, not from a store listing. We have not tested any of these toilets, and we give no prices or stock. "Gallons per flush" is the water used per flush; the federal limit is 1.6, and WaterSense-labeled toilets use 1.28 or less.

Table of Contents
  1. Where a 14-inch rough-in shows up
  2. Toilets whose spec sheet says 14" rough-in
  3. How to read the columns
  4. Why the list is short
  5. Before you order
  6. Sources

Where a 14-inch rough-in shows up

Rough-in is the distance from the finished back wall to the center of the drain opening (the flange). TOTO's guide calls 12 inches "the standard (or at least most common)" distance today and says "older homes, and even modern homes, may come with 10" or 14" rough-in distances depending on the size and shape of the bathroom" (TOTO, toilet rough-ins). So a 14" drain can turn up in an older house or a newer one, and it is not a case of picking a "bigger" toilet: it is a different place for the drain.

The same TOTO guide says it is best to buy a toilet with the same rough-in as the old one, because changing it means opening the floor. It adds that fitting a 12" toilet on a 14" rough-in "will leave a sizable gap between the toilet tank and the bathroom's finished wall". How to measure yours, with and without the toilet in place, is in our toilet rough-in guide. The 10-inch case is in toilets for a 10-inch rough-in.

For context only: TOTO says it sells a "Unifit" rough-in adapter for select skirted models, which "will replace the lower half of your new TOTO toilet's trapway" so that a 14" drain can take a toilet built for 12". TOTO also warns that the adapters are "not compatible with all TOTO toilet models" (same TOTO page). We list no TOTO model here, because we did not read a 14" TOTO spec sheet.

Toilets whose spec sheet says 14" rough-in

Sources: each model's maker spec sheet, linked in the first column, plus the MaP list of September 24, 2026 (MaP downloads), all consulted November 17, 2026. "WaterSense" means the sheet lists it. "MaP score" is the grams in MaP's list for that exact model number; "no MaP score in the list" means the number is not there or its score cell is empty. Where Mansfield's sheet states its own MaP figure, we say so in the notes below the table instead.

Brand and model Rough-in (sheet) gpf Bowl Height (as the maker states it) WaterSense (sheet) MaP score (list)
Kohler Wellworth K-3948-U 14" (356 mm) 1.28 Elongated No height stated Yes 1,000 g
Kohler Wellworth K-3947 14" (356 mm) 1.28 Round-front No height stated Yes 1,000 g
Kohler Highline Comfort Height® K-3949 14" (356 mm) 1.28 Elongated "Comfort Height®", chair-height seating; no figure stated Yes 1,000 g
Sterling Windham 402367 14" (356 mm) 1.28 Round-front "Standard height" Yes no MaP score in the list
Sterling Windham 402368 14" (356 mm) 1.28 Elongated "Standard height" Yes no MaP score in the list
Sterling Windham 402369 14" (356 mm) 1.28 Elongated "Comfort Height®"; no figure stated Yes no MaP score in the list
Mansfield Alto 130-3125 (product page) 14" 1.28 Round front Standard height, 15-1/8" (product page) Not named in the sheet's text no MaP score in the list
Mansfield Alto 135-125 (product page) 14" 1.6 Elongated front Standard height, 15" (product page) Not named in the sheet's text no MaP score in the list
American Standard Cadet PRO Compact Right Height® 215FC.104 (product page) 14" (356 mm) 1.28 Compact elongated 16-1/2" rim height "Meets EPA WaterSense® criteria" 1,000 g

Notes on the table:

  • Kohler. The K-3948-U sheet reads "Rough-in: 14" (356 mm)" and lists the K-4198 elongated bowl with the K-4841-U lined tank. The K-3947 and K-3949 sheets give the same 14" and the K-4841 tank. Kohler's sheets draw the height on the diagram but do not state it in the text, so we show none. Comfort Height® is Kohler's name for its chair-height bowls; its sheet says it "offers chair-height seating that makes sitting down and standing up easier for most adults".
  • Sterling. Sterling's sheets are hosted by Kohler and dated February and March 2024. Each toilet is a bowl plus the 402365 tank. The sheets say "Standard height" or "Comfort Height®", with no figure. All three Windham numbers appear in MaP's list with the WaterSense flag but with the score cell left blank.
  • Mansfield. The 130-3125 and 135-125 sheets are dated Rev. 11/23 and Rev. 04/20. Both state "MaP RATING 800 grams" on Mansfield's own sheet, but neither number is in MaP's list. The 135-125 is a 1.6 gpf toilet; its sheet does not name WaterSense, and the WaterSense limit is 1.28 gpf. On Mansfield's product pages these 14" toilets are variants of a family whose headline spec reads 12", so check the model number rather than the page title.
  • American Standard. The 215F sheet says the toilet "is designed to rough-in at a minimum dimension of 356mm (14") from finished wall to C/L of outlet" and "1,000g MaP Score** at 1.28 gpf" (American Standard 215F sheet). Right Height® is American Standard's name for its tall bowls.

How to read the columns

gpf. Federal law caps new gravity tank toilets at 1.6 gpf (42 U.S.C. 6295(k)). EPA says WaterSense toilets use "1.28 gallons per flush or less", which is "20 percent less water than the current federal standard of 1.6 gallons per flush" (EPA WaterSense, residential toilets). Eight of the nine models above are at 1.28; the Mansfield 135-125 is at the 1.6 maximum.

MaP score. MaP defines it as "the weight in grams of the maximum amount of waste that can be fully evacuated from the toilet in a single flush" (MaP search page). Our column is copied from MaP's published list of September 24, 2026 (MaP downloads); we did not test anything. MaP's note on the list says toilets without a score "have not been MaP tested", so a blank means no published score, not a low one. Mansfield's own 800 grams is the maker's statement, and we cannot match it to a MaP report number.

Height. "Standard" bowls sit lower than the tall bowls the brands sell under their own names: Comfort Height® (Kohler and Sterling), Right Height® (American Standard). Brands do not measure the same way. See comfort height vs standard toilets for what the ADA measures and what each brand states.

Round or elongated. Three of the models are round-front, one is compact elongated, and the rest elongated. The sheets give bowl shape, but we do not give projection figures here: Kohler, Sterling and Mansfield each draw them differently, and the drawings are the place to check against your room.

Why the list is short

Mansfield's Alto pages show the 14" as one variant among several. We found Kohler, Sterling, Mansfield and American Standard sheets that state 14". We also left Gerber out: its 14" sheets we could read are from 2011 and hosted by a retailer, not by Gerber. For flush performance across brands, see best flushing toilets by the numbers.

Before you order

  • Measure from the finished wall to the center of the drain, or to the center of a floor bolt on an installed toilet. A 14" result should read close to 14, not 12 (TOTO).
  • Match the full model number, not the product family. A family page can show 12" in its headline and 14" in a variant.
  • Check the maker's sheet for the bowl and tank numbers on your model: Sterling and Kohler list bowl and tank separately.

If you want to see what is sold online on the day you look, a search for 14-inch rough-in toilets on Amazon lists them; confirm the rough-in against the maker's sheet before ordering.

Sources

Kohler spec sheets: K-3947, K-3948-U, K-3949. Sterling spec sheets: 402367, 402368, 402369. Mansfield: 130-3125 sheet, 135-125 sheet, Alto 1.28 round page, Alto 1.6 elongated page. American Standard: 215F sheet, product page. TOTO: toilet rough-ins and Unifit. EPA: WaterSense residential toilets. Federal law: 42 U.S.C. 6295(k). MaP: list of September 24, 2026, score definition. All pages checked November 17, 2026.

If you'd like to read other articles similar to 14-Inch Rough-In Toilets Compared: What the Makers' Spec Sheets Say You can visit the category Rough-In Sizes.

You may also enjoy reading

Go up