Skip to main content
A tall white elongated toilet beside a wood vanity in a modern US bathroom, seen from the side

Comfort Height vs Standard Toilets: Seat and Rim Heights by the Numbers

As an Amazon Associate we earn from qualifying purchases. Product links on this page may be affiliate links.

Last reviewed: November 2026. Sources last checked November 2026.

A "comfort height" toilet is a taller bowl, and American Standard puts its Right Height rim at 16-1/2 inches, against about 15 inches for a traditional bowl. The ADA's 17 to 19 inch range is a different measurement: it is taken to the top of the seat, not the rim. By American Standard's own figures, a 16-1/2 inch rim plus the seat ring comes to roughly 17 inches at the seat (our addition), which is where the two figures meet. Kohler and TOTO publish no inch figure in the text we read.

Below: what each brand name means, what the ADA actually requires and where it does not apply, a table of every figure we could read with what it measures, and how many models in MaP's public list are marked as tall bowls. We have not measured any toilet. Every number is from a maker, the ADA standards or MaP's list, and each one is linked.

Table of Contents
  1. Rim height and seat height are not the same number
  2. What the ADA says: 17 to 19 inches, to the top of the seat
  3. What each brand calls its tall bowl, and what it publishes
  4. Kohler and TOTO: what we can and cannot say
  5. How many models in MaP's list are marked as tall bowls
  6. Height is a separate choice from rough-in
  7. Who the extra inches are for
  8. Checklist for comparing heights
  9. Sources

Rim height and seat height are not the same number

This is the whole reason the numbers look inconsistent. Two measurements are in use:

  • Rim (bowl) height: floor to the top edge of the bowl, with no seat on it. American Standard says "the traditional toilet bowl rim height is about 15-inches from the floor, with the seat ring adding another ½ to 1-inch of height" (American Standard, how to choose a toilet).
  • Seat height: floor to the top of the seat. This is what the ADA measures.

Using American Standard's own numbers, a traditional 15 inch rim with a seat ring comes to about 15-1/2 to 16 inches at the seat, and its 16-1/2 inch rim comes to about 17 to 17-1/2. That addition is ours, not the maker's, and the seat you buy changes it: the maker's own page says "slight variation in height may occur based on the height of the seat used" (American Standard Cadet 3 product page). When a listing says only "17 inches" or "chair height", ask which of the two it means.

What the ADA says: 17 to 19 inches, to the top of the seat

The 2010 ADA Standards, section 604.4, read: "The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat." The same section has an exception for homes: "In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of the seat" (2010 ADA Standards for Accessible Design, 604.4).

Read that against the rim figures above. A traditional bowl with a seat, about 15-1/2 to 16 inches by our addition, sits below the 17 inch minimum for accessible public and commercial toilets, but inside the 15 to 19 inch range the standard permits in a home. American Standard puts it plainly on its own page: "Meeting ADA is not a requirement for private residences" (American Standard, ADA compliant toilets). That is a manufacturer's sentence about its own product line, not a legal ruling, and local building codes and any accessible-unit requirement for a given building are separate questions for the local code office.

What each brand calls its tall bowl, and what it publishes

Three names are in use, plus "standard". Each is a trademark or product name of its maker. Heights are quoted as each maker prints them, with what is measured where the source says.

Name Maker Figure published What it measures
Comfort Height Kohler No inch figure in the text we read. The spec sheets say the feature "offers chair-height seating that makes sitting down and standing up easier for most adults" Not stated in the text
Right Height (also "Chair Height") American Standard 16-1/2 in Rim height, floor to rim ("a rim height of 16-1/2 inches from the floor")
Right Height, Cadet 3 elongated 10-inch model (marked "Discontinued" on the maker's site) American Standard 17 in "Measures 17" tall, including seat"
Compact Right Height, Cadet PRO 215F American Standard 16-1/2 in "Rim height for accessible applications"
Universal Height TOTO No inch figure on the product page. TOTO describes it as taking "into account people of all ages and abilities" Not published in what we read
"Standard" (traditional) height American Standard About 15 in; 15 in in its installation chart for the standard Cadet 3 elongated 10-inch model Rim height; the seat ring adds 1/2 to 1 in

Sources, all checked November 17, 2026: American Standard (how to choose a toilet; Cadet 3 product page; Cadet PRO 215F spec sheet; Cadet 3 installation guide). Kohler: Cimarron K-3851 spec sheet and Highline K-6393 spec sheet. TOTO: Drake product page.

The Cadet 3 page carries "Discontinued" on American Standard's site, so it is an example of how a maker states the number, not a current model. The Cadet 3 installation guide lists bowl height beside each model: "RIGHT HEIGHT® ELONGATED" at 16-1/2 inches and a plain "ELONGATED" 10-inch model at 15 inches. That one chart shows the two heights from the same maker side by side.

Kohler and TOTO: what we can and cannot say

Kohler's spec sheets name the feature and describe it. The Cimarron and Highline sheets read "Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults", and list "ADA" among the codes, with the note that the fixture is "ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations". A drawing on the sheets carries a 16-1/2 inch dimension, but the text does not label it, so we do not give a Kohler figure. Check the dimension drawing on the sheet for the exact model.

TOTO calls its tall bowl "Universal Height" on the Drake page and gives no inches. The Drake sheet lists an overall dimension for the bowl, but not what the "H" measures, so we leave it out rather than guess. If you need a number from either brand, take it from that model's sheet and see which part of the toilet it measures.

How many models in MaP's list are marked as tall bowls

MaP's public list has a column called "Comfort Height Bowl (CH)". In the list dated September 24, 2026 (MaP, tank-type and electro-hydraulic toilets, list of 2026-09-24, consulted November 17, 2026), our count is 6,617 models (the rows with a model number), of which 2,917 are marked "CH", about 44% (two of them are written "Ch"). Of those 2,917, 2,565 carry the WaterSense mark in the list's WaterSense column, about 88%. The column does not say how tall a bowl is; it only flags the bowls MaP's list treats as tall. Two entries marked "ADA" and seven marked "-" are not counted.

So tall bowls are common: they are marked on a large share of the models MaP lists, from many brands, not only the three names above. A name on the box is a brand's wording; the number on the sheet is the thing to compare. WaterSense and flush performance are separate questions, covered in best flushing toilets by the numbers.

Height is a separate choice from rough-in

Bowl height does not change where the drain sits. The 12 inch rough-in (and the 10 and 14 inch variants) is a wall-to-drain distance, explained in toilet rough-in: what it is and how to measure it. You can get a tall bowl at 10 inches; see toilets for a 10-inch rough-in for models whose sheets list one, and 14-inch rough-in toilets for models whose sheets list one. The seat sits on top of all of this, and a search for tall toilets on Amazon shows what is sold online the day you look; read the height line for what it measures.

Who the extra inches are for

Kohler says its feature is for "most adults", and the ADA range exists for accessible use. We are not clinicians and this is not medical advice. If a bad knee, a hip, balance or a mobility device is part of the reason you are asking, a doctor or an occupational therapist can say what height and what grab bars suit you; the standards above give a range, not a prescription for a person.

Checklist for comparing heights

  • Which part is measured: the rim, or the top of the seat?
  • Is the figure from the maker's sheet for the exact model, with its date?
  • Does the model come with a seat, and which one? The seat changes the number.
  • Is a bare 17 inches a rim or a seat figure? 17 at the rim is a different bowl from 17 at the seat.
  • Does the project need to meet the ADA, or is it a private home where the 15 to 19 inch residential range applies?

Sources

ADA: 2010 ADA Standards for Accessible Design (section 604.4). American Standard: how to choose a toilet, ADA compliant toilets, Cadet 3 product page, Cadet PRO 215F, Cadet 3 installation guide. Kohler: K-3851, K-6393. TOTO: Drake page. MaP: downloads, list of 2026-09-24. Comfort Height is a registered trademark of Kohler and Right Height of American Standard; "Universal Height" is TOTO's name. All checked November 17, 2026.

If you'd like to read other articles similar to Comfort Height vs Standard Toilets: Seat and Rim Heights by the Numbers You can visit the category Seat Height.

Go up